Introduction:
One of the biggest problems new team builders run into is that they don’t know where to start. Am I supposed to build around one Pokemon, two Pokemon, or a central idea? Everyone has their own way of building that they’ve been accustomed to, and for new team builders, all the different ways to build a team clouds the correct path to take. My proposal – and what we teach in Battling 101 – is that new team builders be given “frameworks” to build their ideas out of. Therefore, you’d have frameworks for offense, balance, stall, etc. The biggest complaint that I get from people about frameworks is that it limits creativity. I just want to dispel that myth right away. First, I argue that the creativity starts with the initial idea. Whether that is a new and creative set or a Pokemon that is never used, the creativity resides in the starting point of your team. I just want to stress that I said “the starting point,” as it’s not necessarily your centerpiece. But I’ll get more into that later. All that you have to remember is that most creativity in team building will take place even before you begin picking Pokemon.
Another critical point I want to get out of the way is the difference between frameworks and editing. Sometimes, these two phases can be misidentified in the team building process, but they are different. A framework is the process I’m labeling the initial draft – nothing more, nothing less. Thus, initial frameworks can be either really good or really bad. Our goal, by using formulas is to get that initial draft as close to the final product as possible. On the other hand, editing is everything after the initial draft. It’s the phase where you tinker with the EVs or replace a Pokemon that doesn’t seem to hold its weight.
Lastly, I don’t claim to hold the best frameworks or formulas for each and every playstyle – not even my acclaimed heavy offense. In fact, my formulas are always changing. Whenever there is a shift in the metagame certain roles become more useful than others. This prompts me to change them. Everyone has their own way breaking down their team building process, even if they’re oblivious to their own structures. Some are better than others. However, while I give my current formulas in this article, I want to stress that these aren’t set in stone. Just because I say there should be a pivot in a balance team does not mean that there’s no way a balance team can function without a pivot. Whether it be from editing a role out or changing the actual formula itself, frameworks will and forever be changing. The metagame doesn’t stay static; why should your team building?
Creating Roles:
Before we get started in the actual framework creation process, we need to prepare lists for each role. No matter what tier or generation you are in, you will be able to sort each Pokemon into specific roles. Each Pokemon can fit into one or multiple roles, so long as they are utilized in the same manner that they were placed. For example, if you slot a Dragonite as a sweeper, then it shouldn’t be used turn two breaking the opponent’s team. In this example, Dragonite could have been used as either a breaker or sweeper. Though this seems very tedious, you only have to do it one time per tier, and you can use it for all team building endeavors after. The most effective way that I’ve found to create lists is by using the threat list thread to identify all the major Pokemon in each tier, and then sorting them accordingly. It is important to go through this process slow, as even if a Pokemon isn’t generally used in one type of role, you can still it useful in the future. For example, although Lucario is mainly used as a sweeper, you could use it as a lure with Hidden Power Ice, effectively taking out Gliscor for your main sweeper. It’s best just to keep an open mind when slotting for each role. You never know when a particular resistance or ability to break a core will come in handy, especially if you’re trying to build around something unorthodox. Lastly, not all Pokemon are listed on that threat list, so it’s important that you also go deeper into the tier and find roles for each Pokemon. If you’re playing in the BW UU tier, then looking in the BW RU tier is plausible, as there are likely some usable Pokemon, even if the majority of BW UU players don’t use them.
Though this article is about the initial framework, the lists will also help in editing teams. If a particular Pokemon is not performing its duty, then using your lists you can find a Pokemon that fills the same role but also filling the weakness you want to cover. All in all, the lists just make team building more efficient and save a lot of time searching for Pokemon.
Offense:
Lead | 2 Breakers | Pivot | Sweeper | Speed
Even though leads aren’t classified as much in the BW generation as much, they are still a useful role in offensive teams. These are usually the Pokemon that setup Stealth Rocks, taunt opposing entry hazards, or setup pivotal screens. I’m sure everyone knows the common leads (Azelf, Aerodactyl, etc.), but the key question is which lead to use. Don’t they all do pretty much the same thing? There are three main variables you have to look at when choosing a lead. The first variable is whether or not your team has a Stealth Rocks weakness. If your team has Dragonite and Salamence, odds are you’re going to be restricted into using a lead that has Taunt, such as Azelf. The second variable is if you have a ghost-type in your team. A lot of people overlook this one, but it’s important to know if you’re able to spin block. If your team doesn’t have a ghost-type, then you’re forced to run a lead that has a built-in spin block. For example, you could run Explosion on Azelf to disable the opponent from using Rapid Spin. From there, you should be able to keep the pressure to not allow the opponent to spin away your hazards. Lastly, you need to be able to flow directly from your lead to your breakers. This variable is difficult to quantify, but the easiest way to factor this in is to play a fictitious battle out in your head. Simply imagine each lead attracting certain Pokemon and performing a certain course of action. After that, determine whether or not your breakers can maintain the pressure.
The role of breaker is defined as a Pokemon that either lures or puts pressure on Pokemon that wall your sweeper. A classic example of a lure is Fire Blast Garchomp. If your team has a Swords Dance, Rock Polish Landorus-T, then by luring Skarmory with Garchomp, you’ve effectively paved the way for a sweep. In contrast, if you were using the same Landorus-T set, but you wanted to put pressure on Skarmory (rather than lure it), then perhaps you’d use a Life Orb, Adamant Terrakion. It is not required to pick one type or the other. As there are usually two breakers, it is common to use both types of breakers in one team. Though it may be tempting to use Choice Band or Choice Specs items here, it is best to use either Life Orb or Expert Belt. The unspoken rule is that you use Choice items when you have a fallback option (many pivots) and Life Orb or Expert Belt when you don’t. The reason is that while you may deal more damage, the opponent is also able to deal damage back. You lose momentum every time you use a Choice item, which is the key thing to have in offensive teams. When you have multiple pivots, you’re able to sponge the damage and reposition yourself accordingly, but that’s in more defensive teams. Choice Scarf users are different, as they shouldn’t be switching out. But that will be covered more in-depth in the “speed” role.
There are only a select number of pivots in the entire game, as not many Pokemon possess the inherent moves required. Specifically, a Pokemon must have one of Baton Pass, Volt Switch, or U-Turn. As mentioned earlier, pivots sponge damage, which allows you to reposition yourself to secure the momentum. Many people make the mistake of giving their pivot speed, or not reducing the speed. On all of my pivots I change the nature to minus speed and reduce the speed IVs to zero. If I happen to face an identical Pokemon, then I know I’ll be able to get in the last pivot, which gives me the momentum.
Most of the Pokemon you slotted in for breakers will be usable as sweepers. It’s not the inherent setup moves that make this role unique. Instead, it’s how you utilize the Pokemon. If you use it at the beginning, rather than towards the end, then it is more of a breaker. That being said, you don’t always have to use it after the breakers are all dead. The key is for all of the opposing counters of your sweeper to first be neutralized or in range for a kill. But remember in the battle which Pokemon are your breakers and which is your sweeper.
The reason why I classify the last role as “speed” instead of “scarf” is because there are Pokemon that are capable of cleaning up that aren’t Choice Scarf users. The two most prominent are Sharpedo and Yanmega. Both are able to reach the high speeds needed to finish off anything that wasn’t already dealt with. However, the majority of Pokemon used in this role will be Choice Scarf users. This role can often be seen as the end game sweeper. Though it is not called a sweeper, it is really the Pokemon that finishes off everything. The breakers weakened the counters for the sweeper. But the sweeper severely injured the counters, and then some. If the breakers and sweeper did their job, the “speed” role just has to clean everything up. As there are many weakened Pokemon by the time it is sent in, Moxie Pokemon are particularly helpful in this role, as it only gets stronger as it picks off more Pokemon.
I have also been experimenting with a slight variation. I have recently been using a Spikes lead, with my pivot carrying Stealth Rocks. Of course, this isn’t exactly traditional “hazard offense,” but I thought that my pivot in one team wasn’t doing enough. So instead of limiting myself to Stealth Rocks, with the rare occasion of one layer of spikes getting on the field, I decided to split the duty up. This ended up allowing me to get much more hazards on the field.
Balance:
Weather | Breaker | Utility | Pivot | Sweeper | Speed
The four weather options are hail, rain, sun, and sandstorm. The important thing to remember is that at least one of your Pokemon needs to benefit from the weather. Balance is not stall. You’re not trying to outlast the opponent with residual damage. Often times, team builders try to stick random Pokemon in certain weathers, but they forget that there has to be something that benefits from it. Just because your sweeper is Scizor does not mean that rain should be your weather of choice. A logical reasoning would be to use Choice Scarf Keldeo on a rain team, as the cleanup sweeper would best do its job with a more powerful STAB attack. Just make sure there is a valid reason for the weather you choose.
The breaker in balance teams is like an evolved version of a breaker in offensive teams. Though breakers from offensive teams are still perfectly viable here, I often find myself venturing to more bulky Pokemon. Some of my favorite choices are Kyurem-B and Garchomp, both with Substitute. Of course, having breakers that apply pressure or lure are just as good in balance teams. However, having good resistances and bulk is helpful here, as unlike in offensive teams, you have somewhat of a defensive backbone. You’re able to switch out the breaker that you sent in, instead of just suiciding it. It’s a luxury in balance teams, but not required. In some cases, it may be better to go the more traditional route. For example, the bulkier breakers tend to have issues with stall teams. If this is the case, a lure may be a better option, as it lures the counter before it can setup hazards. Lastly, given that balance teams are more defensive, this also allows for the use of Choice Band and Choice Specs items, as you now have more defensive presence to sponge attacks. Momentum isn’t as much of an issue.
I really hate to label a role as “utility,” since it is absurdly vague. However, I have found that balance teams are able to run with either a more offensive or defensive edge. In the case of an offensive edge, it is like adding another breaker. There is one slight catch, though. The crux of this role is that it must fill in the gaps of your team. It should often be the last role that you figure out. For example, if you had a bit of an issue with Breloom, then adding a Latios would fill the requirement of beating Breloom, while also adding an offensive twist. If you instead want to throw a defensive edge in, then adding a Pokemon that counters the threats that you want to deal with will suffice. Usually, the only times that I run with a defensive twist is if I have a number of threats I have to check with this one role. In this case, an offensive Pokemon wouldn’t be able to deal with the amount of threats I’d have to cover. Again, this is the vaguest role, but I’ve found success in both types of variations.
The pivot, sweeper, and speed roles are all the same as the offensive teams, but with some slight exceptions. First of all, Stealth Rocks can be either on the pivot or the weather. Obviously, some weather Pokemon do not have access to Stealth Rocks, so that would automatically be deferred to the pivot or a defensive utility. Lastly, the sweeper and speed roles benefit the most from being on a balance team. Though balance teams are usually heralded for being defensive, the best characteristic is its ability to use a weather role. Therefore, these two roles are usually much different than if they were in an offensive team.
Closing Comments:
Now that I’ve given you the roles in both offensive and balance teams, the question remains: where should I start? As I said in the introduction, the beauty of these frameworks is that they don’t deny you of any creativity. Start where your inspiration for the team originated. You first need an idea before you can start building. If you originally wanted to build a team with lure Lucario, then figure out what benefits from Gliscor being dead. If you have an inventive new set for a pivot, figure out in what type of team and what weather would best benefit from it. Maybe certain breakers attract the use of that pivot, and it ends up allowing the team to flow really well.
Additionally, you may have noticed that I left out the framework on stall. Stall has been split into roles long before Obi dissected every piece of it in DPP. Though stall is rarely ever used anymore and is one of the most basic teams to build, it does spell out the fundamentals. It teaches you in black and white what Pokemon use Stealth Rocks, Spikes, etc. There is no guessing which Pokemon are capable of doing a certain role, as they are inherently able to do so.
Everyone always complains that team building is so difficult. Well, after reading this article, you should be able to create a team in less than five minutes with the appropriate lists. The real challenge is coming up with an idea worthy enough to build around. Unfortunately, I have no framework for creativity.
One of the biggest problems new team builders run into is that they don’t know where to start. Am I supposed to build around one Pokemon, two Pokemon, or a central idea? Everyone has their own way of building that they’ve been accustomed to, and for new team builders, all the different ways to build a team clouds the correct path to take. My proposal – and what we teach in Battling 101 – is that new team builders be given “frameworks” to build their ideas out of. Therefore, you’d have frameworks for offense, balance, stall, etc. The biggest complaint that I get from people about frameworks is that it limits creativity. I just want to dispel that myth right away. First, I argue that the creativity starts with the initial idea. Whether that is a new and creative set or a Pokemon that is never used, the creativity resides in the starting point of your team. I just want to stress that I said “the starting point,” as it’s not necessarily your centerpiece. But I’ll get more into that later. All that you have to remember is that most creativity in team building will take place even before you begin picking Pokemon.
Another critical point I want to get out of the way is the difference between frameworks and editing. Sometimes, these two phases can be misidentified in the team building process, but they are different. A framework is the process I’m labeling the initial draft – nothing more, nothing less. Thus, initial frameworks can be either really good or really bad. Our goal, by using formulas is to get that initial draft as close to the final product as possible. On the other hand, editing is everything after the initial draft. It’s the phase where you tinker with the EVs or replace a Pokemon that doesn’t seem to hold its weight.
Lastly, I don’t claim to hold the best frameworks or formulas for each and every playstyle – not even my acclaimed heavy offense. In fact, my formulas are always changing. Whenever there is a shift in the metagame certain roles become more useful than others. This prompts me to change them. Everyone has their own way breaking down their team building process, even if they’re oblivious to their own structures. Some are better than others. However, while I give my current formulas in this article, I want to stress that these aren’t set in stone. Just because I say there should be a pivot in a balance team does not mean that there’s no way a balance team can function without a pivot. Whether it be from editing a role out or changing the actual formula itself, frameworks will and forever be changing. The metagame doesn’t stay static; why should your team building?
Creating Roles:
Before we get started in the actual framework creation process, we need to prepare lists for each role. No matter what tier or generation you are in, you will be able to sort each Pokemon into specific roles. Each Pokemon can fit into one or multiple roles, so long as they are utilized in the same manner that they were placed. For example, if you slot a Dragonite as a sweeper, then it shouldn’t be used turn two breaking the opponent’s team. In this example, Dragonite could have been used as either a breaker or sweeper. Though this seems very tedious, you only have to do it one time per tier, and you can use it for all team building endeavors after. The most effective way that I’ve found to create lists is by using the threat list thread to identify all the major Pokemon in each tier, and then sorting them accordingly. It is important to go through this process slow, as even if a Pokemon isn’t generally used in one type of role, you can still it useful in the future. For example, although Lucario is mainly used as a sweeper, you could use it as a lure with Hidden Power Ice, effectively taking out Gliscor for your main sweeper. It’s best just to keep an open mind when slotting for each role. You never know when a particular resistance or ability to break a core will come in handy, especially if you’re trying to build around something unorthodox. Lastly, not all Pokemon are listed on that threat list, so it’s important that you also go deeper into the tier and find roles for each Pokemon. If you’re playing in the BW UU tier, then looking in the BW RU tier is plausible, as there are likely some usable Pokemon, even if the majority of BW UU players don’t use them.
Though this article is about the initial framework, the lists will also help in editing teams. If a particular Pokemon is not performing its duty, then using your lists you can find a Pokemon that fills the same role but also filling the weakness you want to cover. All in all, the lists just make team building more efficient and save a lot of time searching for Pokemon.
Offense:
Lead | 2 Breakers | Pivot | Sweeper | Speed
Even though leads aren’t classified as much in the BW generation as much, they are still a useful role in offensive teams. These are usually the Pokemon that setup Stealth Rocks, taunt opposing entry hazards, or setup pivotal screens. I’m sure everyone knows the common leads (Azelf, Aerodactyl, etc.), but the key question is which lead to use. Don’t they all do pretty much the same thing? There are three main variables you have to look at when choosing a lead. The first variable is whether or not your team has a Stealth Rocks weakness. If your team has Dragonite and Salamence, odds are you’re going to be restricted into using a lead that has Taunt, such as Azelf. The second variable is if you have a ghost-type in your team. A lot of people overlook this one, but it’s important to know if you’re able to spin block. If your team doesn’t have a ghost-type, then you’re forced to run a lead that has a built-in spin block. For example, you could run Explosion on Azelf to disable the opponent from using Rapid Spin. From there, you should be able to keep the pressure to not allow the opponent to spin away your hazards. Lastly, you need to be able to flow directly from your lead to your breakers. This variable is difficult to quantify, but the easiest way to factor this in is to play a fictitious battle out in your head. Simply imagine each lead attracting certain Pokemon and performing a certain course of action. After that, determine whether or not your breakers can maintain the pressure.
The role of breaker is defined as a Pokemon that either lures or puts pressure on Pokemon that wall your sweeper. A classic example of a lure is Fire Blast Garchomp. If your team has a Swords Dance, Rock Polish Landorus-T, then by luring Skarmory with Garchomp, you’ve effectively paved the way for a sweep. In contrast, if you were using the same Landorus-T set, but you wanted to put pressure on Skarmory (rather than lure it), then perhaps you’d use a Life Orb, Adamant Terrakion. It is not required to pick one type or the other. As there are usually two breakers, it is common to use both types of breakers in one team. Though it may be tempting to use Choice Band or Choice Specs items here, it is best to use either Life Orb or Expert Belt. The unspoken rule is that you use Choice items when you have a fallback option (many pivots) and Life Orb or Expert Belt when you don’t. The reason is that while you may deal more damage, the opponent is also able to deal damage back. You lose momentum every time you use a Choice item, which is the key thing to have in offensive teams. When you have multiple pivots, you’re able to sponge the damage and reposition yourself accordingly, but that’s in more defensive teams. Choice Scarf users are different, as they shouldn’t be switching out. But that will be covered more in-depth in the “speed” role.
There are only a select number of pivots in the entire game, as not many Pokemon possess the inherent moves required. Specifically, a Pokemon must have one of Baton Pass, Volt Switch, or U-Turn. As mentioned earlier, pivots sponge damage, which allows you to reposition yourself to secure the momentum. Many people make the mistake of giving their pivot speed, or not reducing the speed. On all of my pivots I change the nature to minus speed and reduce the speed IVs to zero. If I happen to face an identical Pokemon, then I know I’ll be able to get in the last pivot, which gives me the momentum.
Most of the Pokemon you slotted in for breakers will be usable as sweepers. It’s not the inherent setup moves that make this role unique. Instead, it’s how you utilize the Pokemon. If you use it at the beginning, rather than towards the end, then it is more of a breaker. That being said, you don’t always have to use it after the breakers are all dead. The key is for all of the opposing counters of your sweeper to first be neutralized or in range for a kill. But remember in the battle which Pokemon are your breakers and which is your sweeper.
The reason why I classify the last role as “speed” instead of “scarf” is because there are Pokemon that are capable of cleaning up that aren’t Choice Scarf users. The two most prominent are Sharpedo and Yanmega. Both are able to reach the high speeds needed to finish off anything that wasn’t already dealt with. However, the majority of Pokemon used in this role will be Choice Scarf users. This role can often be seen as the end game sweeper. Though it is not called a sweeper, it is really the Pokemon that finishes off everything. The breakers weakened the counters for the sweeper. But the sweeper severely injured the counters, and then some. If the breakers and sweeper did their job, the “speed” role just has to clean everything up. As there are many weakened Pokemon by the time it is sent in, Moxie Pokemon are particularly helpful in this role, as it only gets stronger as it picks off more Pokemon.
I have also been experimenting with a slight variation. I have recently been using a Spikes lead, with my pivot carrying Stealth Rocks. Of course, this isn’t exactly traditional “hazard offense,” but I thought that my pivot in one team wasn’t doing enough. So instead of limiting myself to Stealth Rocks, with the rare occasion of one layer of spikes getting on the field, I decided to split the duty up. This ended up allowing me to get much more hazards on the field.
Balance:
Weather | Breaker | Utility | Pivot | Sweeper | Speed
The four weather options are hail, rain, sun, and sandstorm. The important thing to remember is that at least one of your Pokemon needs to benefit from the weather. Balance is not stall. You’re not trying to outlast the opponent with residual damage. Often times, team builders try to stick random Pokemon in certain weathers, but they forget that there has to be something that benefits from it. Just because your sweeper is Scizor does not mean that rain should be your weather of choice. A logical reasoning would be to use Choice Scarf Keldeo on a rain team, as the cleanup sweeper would best do its job with a more powerful STAB attack. Just make sure there is a valid reason for the weather you choose.
The breaker in balance teams is like an evolved version of a breaker in offensive teams. Though breakers from offensive teams are still perfectly viable here, I often find myself venturing to more bulky Pokemon. Some of my favorite choices are Kyurem-B and Garchomp, both with Substitute. Of course, having breakers that apply pressure or lure are just as good in balance teams. However, having good resistances and bulk is helpful here, as unlike in offensive teams, you have somewhat of a defensive backbone. You’re able to switch out the breaker that you sent in, instead of just suiciding it. It’s a luxury in balance teams, but not required. In some cases, it may be better to go the more traditional route. For example, the bulkier breakers tend to have issues with stall teams. If this is the case, a lure may be a better option, as it lures the counter before it can setup hazards. Lastly, given that balance teams are more defensive, this also allows for the use of Choice Band and Choice Specs items, as you now have more defensive presence to sponge attacks. Momentum isn’t as much of an issue.
I really hate to label a role as “utility,” since it is absurdly vague. However, I have found that balance teams are able to run with either a more offensive or defensive edge. In the case of an offensive edge, it is like adding another breaker. There is one slight catch, though. The crux of this role is that it must fill in the gaps of your team. It should often be the last role that you figure out. For example, if you had a bit of an issue with Breloom, then adding a Latios would fill the requirement of beating Breloom, while also adding an offensive twist. If you instead want to throw a defensive edge in, then adding a Pokemon that counters the threats that you want to deal with will suffice. Usually, the only times that I run with a defensive twist is if I have a number of threats I have to check with this one role. In this case, an offensive Pokemon wouldn’t be able to deal with the amount of threats I’d have to cover. Again, this is the vaguest role, but I’ve found success in both types of variations.
The pivot, sweeper, and speed roles are all the same as the offensive teams, but with some slight exceptions. First of all, Stealth Rocks can be either on the pivot or the weather. Obviously, some weather Pokemon do not have access to Stealth Rocks, so that would automatically be deferred to the pivot or a defensive utility. Lastly, the sweeper and speed roles benefit the most from being on a balance team. Though balance teams are usually heralded for being defensive, the best characteristic is its ability to use a weather role. Therefore, these two roles are usually much different than if they were in an offensive team.
Closing Comments:
Now that I’ve given you the roles in both offensive and balance teams, the question remains: where should I start? As I said in the introduction, the beauty of these frameworks is that they don’t deny you of any creativity. Start where your inspiration for the team originated. You first need an idea before you can start building. If you originally wanted to build a team with lure Lucario, then figure out what benefits from Gliscor being dead. If you have an inventive new set for a pivot, figure out in what type of team and what weather would best benefit from it. Maybe certain breakers attract the use of that pivot, and it ends up allowing the team to flow really well.
Additionally, you may have noticed that I left out the framework on stall. Stall has been split into roles long before Obi dissected every piece of it in DPP. Though stall is rarely ever used anymore and is one of the most basic teams to build, it does spell out the fundamentals. It teaches you in black and white what Pokemon use Stealth Rocks, Spikes, etc. There is no guessing which Pokemon are capable of doing a certain role, as they are inherently able to do so.
Everyone always complains that team building is so difficult. Well, after reading this article, you should be able to create a team in less than five minutes with the appropriate lists. The real challenge is coming up with an idea worthy enough to build around. Unfortunately, I have no framework for creativity.
